trueSpace 7.61 Unofficial Update Patches
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: trueSpace 7.61 Unofficial Update Patches
More reliable Origin Function Set Dimension bypass as suggested
- Attachments
-
- Origin Function Set03.RsObj
- (31.27 KiB) Downloaded 42 times
Re: trueSpace 7.61 Unofficial Update Patches
Mesh Origin scripts need to be adjusted some more to avoid Dimensions
This Linear measurement was attached to the Cube before using Mesh Origin .
While in Edit Graphic mode is problematic
Origin to PE Selection is problematic
Set Snap Point Widget is problematic
I think the easiest solution would be to add a command to the Mesh Origin panel buttons to avoid Dimension(S)
Also, again, Origin to PE Selection does not RClick Cancel when there is no PE Selection
Status message is stuck
TODO: Need to check if the widget is still loaded
This Linear measurement was attached to the Cube before using Mesh Origin .
While in Edit Graphic mode is problematic
Origin to PE Selection is problematic
Set Snap Point Widget is problematic
I think the easiest solution would be to add a command to the Mesh Origin panel buttons to avoid Dimension(S)
Code: Select all
if(Node.ConExists('', 'Dimension')) return;
Status message is stuck
TODO: Need to check if the widget is still loaded
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: trueSpace 7.61 Unofficial Update Patches
Change Light Type
updated script to not change the link editor location
works by copying the hidden LE2Data connector value - great suggestion
updated script to not change the link editor location
works by copying the hidden LE2Data connector value - great suggestion
- Attachments
-
- Change Light Type.RsObj
- (34.55 KiB) Downloaded 44 times
Re: trueSpace 7.61 Unofficial Update Patches
Perfecto!clintonman wrote: ↑09 Oct 2023, 18:14 Change Light Type
updated script to not change the link editor location
works by copying the hidden LE2Data connector value - great suggestion
Added a Convert Camera Type .
- Attachments
-
- Change Light Type.RsObj
- (62.53 KiB) Downloaded 39 times
Re: trueSpace 7.61 Unofficial Update Patches
@Clinton
Please try this Ctrl = RDrag Gesture Move in Z 'Up Down' for the Background widget
Put it the Background widget's Ortho and Perspective nodes
Hook up the Undoable and Gesture connectors
Navigate Up Down
Please try this Ctrl = RDrag Gesture Move in Z 'Up Down' for the Background widget
Put it the Background widget's Ortho and Perspective nodes
Hook up the Undoable and Gesture connectors
Navigate Up Down
- Attachments
-
- Navigate Up Down.RsObj
- (16.65 KiB) Downloaded 39 times
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: trueSpace 7.61 Unofficial Update Patches
Works in perspective, camera and left,right,front,back views
No motion in top bottom views
Re: trueSpace 7.61 Unofficial Update Patches
Also works in Isometric viewclintonman wrote: ↑10 Oct 2023, 00:13Works in perspective, camera and left,right,front,back views
No motion in top bottom views
I find the Middle Mouse Drag speed in ortho views wildly to fast!
What do you think?
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: trueSpace 7.61 Unofficial Update Patches
Radial Modeler
Floating point rounding error when using the Measure Angle
Hexagon shape should give an angle of 60 degrees which translates to 6 sections to add up to 360 degrees
Problem is measurement was giving an angle of 60.0000000000001
Multiply that by 6 and it goes over 360 degrees giving an error if you try to do 6 sides only allowing 5 sides because it adds up to something like 360.0000000003
Floating point rounding error when using the Measure Angle
Hexagon shape should give an angle of 60 degrees which translates to 6 sections to add up to 360 degrees
Problem is measurement was giving an angle of 60.0000000000001
Multiply that by 6 and it goes over 360 degrees giving an error if you try to do 6 sides only allowing 5 sides because it adds up to something like 360.0000000003
- Attachments
-
- Radial Modeler.RsObj
- (95.61 KiB) Downloaded 47 times
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: trueSpace 7.61 Unofficial Update Patches
Mesh Origin
renamed panel button "Get Snap Point" to "Set Snap Point"
removed convert to editable from Set Snap Point Widget button
removed convert to editable from Set Snap Point button
new widget, PickOriginWidget with ctrl + rclick option to immediately snap the origin
renamed panel button "Get Snap Point" to "Set Snap Point"
removed convert to editable from Set Snap Point Widget button
removed convert to editable from Set Snap Point button
new widget, PickOriginWidget with ctrl + rclick option to immediately snap the origin
- Attachments
-
- PickOriginWidget01.RsObj
- (45.98 KiB) Downloaded 40 times
-
- MeshOrigin01.RsObj
- (139.23 KiB) Downloaded 44 times
- clintonman
- Captain
- Posts: 5432
- Joined: 21 May 2009, 21:08
- Type the number ten into the box: 0
- Location: California
- Contact:
Re: trueSpace 7.61 Unofficial Update Patches
Forgot to remove dimension protection.clintonman wrote: ↑11 Oct 2023, 15:08 Mesh Origin
renamed panel button "Get Snap Point" to "Set Snap Point"
removed convert to editable from Set Snap Point Widget button
removed convert to editable from Set Snap Point button
new widget, PickOriginWidget with ctrl + rclick option to immediately snap the origin
removed dimension protection from Set Snap Point Widget
removed dimension protection from Set Snap Point
add dimension protect into script where snapping occurs
The Set Snap Point Widget status line still refers to "o" shortcut. This should be change to "ctrl + rclick"
- Attachments
-
- MeshOrigin02.RsObj
- (139.33 KiB) Downloaded 39 times