SMC #62: A Bottle
This Challenge is about Bottles, anything made of glass, plastic,wood, tin etc. that contains something.. Milk, Coke, perfume, Fuel, Wisky etc..
I pick this cos Bottles are very common, Simple, and you can improve your skills and work-flow doing it.. Also you will find different ways to put stickers on it, Liquids, shaders, etc.. Some of you may remember my tutorial about how to fake liquids inside objects..
The Rules:
1) You can use any 3D software you want.
2) Model(s) must be created within a 4 hour time limit.
3) Rendering, Lighting, and Texturing are not included within the 4 hour time limit.
4) You may enter as many times as you wish.
5) Each entry is restricted to 1 beauty render at 800 x 600 pixels.
6) Each entry must be clearly named for voting purposes.
7) Each entry is also to include a wireframe screen grab (before subdivision if used).
8) Each entry must include the time spent, software and render engine used.
9) If you do Wisky or any alcoholic drink, you must certifies that you are at least 18 years old.
10) Drink with responsibility.
11) Don't drink and drive..
12) Duff beer is a plus.
Entry Deadline: before midnight, 20 May 2011.
Voting: To commences on 21 May 2011 and end on 26 May 2011 at midnight.
Please Note: This thread is reserved for entries only and a separate thread will be created for members comments.
Good luck all.
By the way, here is a few examples..
SMC #62: Bottles
- Prodigy
- Site Admin
- Posts: 957
- Joined: 21 May 2009, 14:46
- Type the number ten into the box: 0
- Location: Uruguay
SMC #62: Bottles
๑۩۞۩๑ prodigy ๑۩۞۩๑
Re: SMC #62: Bottles
A quickie that I call "Flask of Visionary Scotch" - for lack of anything else to call it.
Model Hexagon: 10 minutes
Texture: Carrara 8 Pro with some levels in Photoshop
Render: Carrara 8 Pro
Totat time: 2 hours 15 minutes
Model Hexagon: 10 minutes
Texture: Carrara 8 Pro with some levels in Photoshop
Render: Carrara 8 Pro
Totat time: 2 hours 15 minutes
Walk by faith, not by sight.
Re: SMC #62: Bottles
For those long hours while you are on surveillance.
24 hour Energy Drink and Binocular Combo - With "Bendy Straw" - to get that righteous buzz.
Model: Hexagon - 40 minutes
Texture: 3DCoat - 1 hour 20 minutes
Texutre: Carrara 8 Pro - 20 minutes
Render: Carrara 8 Pro - 3 minutes
24 hour Energy Drink and Binocular Combo - With "Bendy Straw" - to get that righteous buzz.
Model: Hexagon - 40 minutes
Texture: 3DCoat - 1 hour 20 minutes
Texutre: Carrara 8 Pro - 20 minutes
Render: Carrara 8 Pro - 3 minutes
Walk by faith, not by sight.
- Finis
- Captain
- Posts: 5268
- Joined: 21 May 2009, 18:26
- Type the number ten into the box: 0
- Location: North Venezuela or West Korea
- Contact:
Re: SMC #62: Bottles
Title: Square Bottom Round Top
Software: TS 7.6 model side. Rendered with lightworks.
Modeling Time: a little less than 50 minutes
Texturing Time: a few minutes
Render Time: 8 minutes
No time for a wip. Details in smc comments thread.
Software: TS 7.6 model side. Rendered with lightworks.
Modeling Time: a little less than 50 minutes
Texturing Time: a few minutes
Render Time: 8 minutes
No time for a wip. Details in smc comments thread.
The more laws, the less justice. -- Marcus Tullius Cicero
-
- Senior Chief Petty Officer
- Posts: 184
- Joined: 03 Apr 2011, 13:42
- Type the number ten into the box: 9
Re: SMC #62: Bottles
here's my render called ready to pour out
modeled and textured in truespace 3.2
modeling took 19 mins and 18 secs, texturing took about 5 mins. and rendering took about 6 secs lol.
modeled and textured in truespace 3.2
modeling took 19 mins and 18 secs, texturing took about 5 mins. and rendering took about 6 secs lol.
Re: SMC #62: Bottles
Tio Contrante Sherry - "The World's Finest Sipping Sherry"
(not really, just made that up)
Model: Hexagon - 1 hour 10 minutes of figety fits
Texturing: 3Dcoat and Photoshop (label), glasswork shader Carrara 8 Pro
Render: Carrara 8 Pro - 8 minutes
(not really, just made that up)
Model: Hexagon - 1 hour 10 minutes of figety fits
Texturing: 3Dcoat and Photoshop (label), glasswork shader Carrara 8 Pro
Render: Carrara 8 Pro - 8 minutes
Walk by faith, not by sight.
- ranger0101
- Master Chief Petty Officer
- Posts: 363
- Joined: 22 May 2009, 13:15
- Type the number ten into the box: 0
- Location: Orrville Ohio U.S.A.
- Contact:
Re: SMC #62: Bottles
Just a glass of wine for starters..
TrueSpace 7.6.1 b8 Model Side
Model time - 35 mins
Render Lightworks Time 48 sec
TrueSpace 7.6.1 b8 Model Side
Model time - 35 mins
Render Lightworks Time 48 sec
In order to Create Art... You must first learn to See...
My Website http://www.theartoftimkoons.yolasite.com
My Website http://www.theartoftimkoons.yolasite.com
Re: SMC #62: Bottles
title: Glass all empty
trueSpace 6.6, 50 minutes for the models, a lot more for the render (with artefacts, it seems).
The material is a combination of u|v Toon and trueSpace glass.
trueSpace 6.6, 50 minutes for the models, a lot more for the render (with artefacts, it seems).
The material is a combination of u|v Toon and trueSpace glass.
- ranger0101
- Master Chief Petty Officer
- Posts: 363
- Joined: 22 May 2009, 13:15
- Type the number ten into the box: 0
- Location: Orrville Ohio U.S.A.
- Contact:
Re: SMC #62: Bottles
Spilled Scotch
TrueSpace 7.6.1 b8 Model Side
Modeling - 1 hour 40 mins
Texturing - 2 hours 35 mins
Render - 4 mins 33 seconds
TrueSpace 7.6.1 b8 Model Side
Modeling - 1 hour 40 mins
Texturing - 2 hours 35 mins
Render - 4 mins 33 seconds
In order to Create Art... You must first learn to See...
My Website http://www.theartoftimkoons.yolasite.com
My Website http://www.theartoftimkoons.yolasite.com
- Prodigy
- Site Admin
- Posts: 957
- Joined: 21 May 2009, 14:46
- Type the number ten into the box: 0
- Location: Uruguay
Re: SMC #62: Bottles
My entry.
Truespace 7.61 beta, Vray for truespace
modeling time 1hour. rendering time 20 mins.
Hdri lighting..
Truespace 7.61 beta, Vray for truespace
modeling time 1hour. rendering time 20 mins.
Hdri lighting..
๑۩۞۩๑ prodigy ๑۩۞۩๑