Final trueSpace 7.61 Beta 8 Unofficial Update

[trueBlue]

Saul, that is something I made that was added to the library, it could be the widget those guys made uses the same widget weight. in the activation node. It uses 2.00 you might need to change that to a higher number to over power their on the Automatic activation Node in the widget.. It only had to compete with the original when it was created. Sorry I can't help beyond that as I don't use the update as it breaks my own tools.

If you upload a modified version that works, I will include it in the update.
Presently there is the original Camera1 widget - Weight = 1, and another Camera widget - Weight = 2

[stan]

David, you can just change the weight from 2.0 to 3.0 and put it back in the library as it's been there since ts7.6 or reduce your to 1.5.

[trueBlue]

David, you can just change the weight from 2.0 to 3.0 and put it back in the library as it's been there since ts7.6 or reduce your to 1.5.

Okay I changed the weight to 3 and included it with this update.

[trueBlue]

Okay I think this is the final update unless somebody discovers something wrong or disapproves.
New to this update:
All Layouts
Included a Objects: My Objects library and My Scenes library
Changed the width of the Stack to 224 and the bottom toolbar's height
This was set at my resoluton 1920 x 1080. Hope it works for everybody.

Material Editor
I was able to remove the Main Library Places from the combo control.

Camera2

FOV
LMB = View from Camera
LMB + Drag = Adjust Field of View
Shift + LMB = Exit Camera View

Rotate
LMB = Spin Left & Right
LMB + Alt = Orbit 360 degrees
LMB + Ctrl = Open Camera preferences
LMB + Shift = Change to Camera1 'Original'
RMB - Tilt Up & Down
RMB + Alt = Tilt Left & Right

Move
LMB = Move X & Y
LMB + Alt = Forward & Reverse
LMB + Ctrl = Open Camera preferences
LMB + Shift = Change to Camera1 'Original'
RMB = Move X & Z

Stand
LMB = Move Left & Right
LMB + Alt = Move X & Z
LMB + Ctrl = Open Camera preferences
LMB + Shift = Change to Camera1 'Original'
RMB = Move Up & Down


View Widget

Green Encircle
Shift + LMB select = Resets the View
Shift + RMB select = Opens the 3D View Widget
Ctrl + LMB select = Opens the Eye Camera panel

New - trueSpace Beta 7.61 Unofficial Update.txt has been updated with all of the changes.

[the_ant]

Great Job trueBlue!!!

From about six months i used Cellulo's tSp 7.6 v2.1 (vRay renders are decents with G.I.)

After your news...i would install tSp7.61B8 from scratch once again...what is the new list of steps to do before launch your Final Update?

[trueBlue]

Thanks, the instructions are in the first post where the file is.
Show me a screen capture after you install it, and let me know your monitor's resolution.

Download the tS761B8 Final Update.zip file and unzip the tS761B8 Final Update.exe

Steps for applying the tS7.61B8 Final Update:

Uninstall VRAY and close trueSpace before applying the Final Update!

1.) Run the tS761B8 Final Update.exe
2.) Browse [...] to where you installed trueSpace eg: C:\trueSpace761, select the trueSpace761 folder, and then the Extract button.
3.) Select the Yes to All button.
4.) Open trueSpace and select the Reset to Default Context icon and the Default layout tab.

[clintonman]

tested installation, no errors to report
material editor library place is reliable with only 1 choice "D3DMaterials", will this have other options? like if vray is installed. If not it should be removed since you don't really have a choice to make.

[trueBlue]

tested installation, no errors to report
material editor library place is reliable with only 1 choice "D3DMaterials", will this have other options? like if vray is installed. If not it should be removed since you don't really have a choice to make.

LOL Clinton, do you remember you help me create this?
So it was not sticking this time?

This is the way it was setup in the UnOfficial Update v.3 and also with NO update.
You do not need to use the Library Browser Edition at all including with VRay.

To enable the Library Browser, select the Update Library Places icon in the Material Editor.
In the Library Places -> Combo Control, select the Main Library Place.
In the next Combo Control, select which libary you would like to open.
Note: At anytime your libraries are not showing, select the Update Library Places icon again to update the Libray Places.
To use the D3DMaterials, select the D3DMaterials in the Library Places -> Combo Control.
In the next Combo Control, select the Materials - DX9

It is not necessary to use the the Library Browser Edition with VRay to find Vray materials in the main library, because the Vray Material Editor's material spheres open their materials.

Also there is a tS761 issue that develops when Installing/Loading and Unloading/Reinstalling from the Package Manager and also with Reinstalling Vray. Selecting the Update Library Places icon fixes it.

Can you show me a full screen capture after you install this update, and let me know your monitor's resolution?

Did you notice the Rosetta version?
viewtopic.php?f=4&t=5418

[clintonman]

tested installation, no errors to report
material editor library place is reliable with only 1 choice "D3DMaterials", will this have other options? like if vray is installed. If not it should be removed since you don't really have a choice to make.

LOL Clinton, do you remember you help me create this?
So it was not sticking this time?

...

Can you show me a full screen capture after you install this update, and let me know your monitor's resolution?

Did you notice the Rosetta version?
viewtopic.php?f=4&t=5418

Can't say I recall helping at all on that.

Nope, didn't see the rosetta version, downloading now.

No sticking, even after using the button to activate the main library.

before - virgin trueSpace

after - updated trueSpace

1920 x 1080 resolution

[trueBlue]

Did you install the newest update for tS761, uploaded yesterday?
The stack’s width should have been set at 224.