How to Bend, taper, twist in the Modelside

Start here all your tutorials for Truespace Worskpace Side.
User avatar
Finis
Captain
Posts: 5256
Joined: 21 May 2009, 18:26
Type the number ten into the box: 0
Location: North Venezuela or West Korea
Contact:

Re: How to Bend, taper, twist in the Modelside

Post by Finis »

Didn't W!zard post his guidelines for using both sides or moving between them? Was that in this forum or in the Caligari days?
Mice die in traps because they don't know why the cheese is free. -- seen on a bumper sticker
User avatar
Draise
Captain
Posts: 3198
Joined: 21 Sep 2009, 19:33
Type the number ten into the box: 0
Location: Bogota, Colombia
Contact:

Re: How to Bend, taper, twist in the Modelside

Post by Draise »

No idea. I found some material on the bridge, it was handy. But I think i found most of it in the manual..
User avatar
trueBlue
Captain
Posts: 5208
Joined: 06 Jul 2009, 22:50
Type the number ten into the box: 10

Re: How to Bend, taper, twist in the Modelside

Post by trueBlue »

Finis wrote:Didn't W!zard post his guidelines for using both sides or moving between them? Was that in this forum or in the Caligari days?
viewtopic.php?p=1542#p1542" onclick="window.open(this.href);return false;
Draise wrote:Unfortunately the modelside of truespace 7.6 does not have a bend, taper nor twist feature.
BTW: Model does have Bend, Taper, and Twist.
Capture.PNG
User avatar
Draise
Captain
Posts: 3198
Joined: 21 Sep 2009, 19:33
Type the number ten into the box: 0
Location: Bogota, Colombia
Contact:

Re: How to Bend, taper, twist in the Modelside

Post by Draise »

lol, "workspace side" doesn't have! typo. oops. :oops:
Post Reply