United3dArtists Archive

FHembree · Post by **FHembree** » 11 Feb 2018, 02:08

After searching several different stadium images from the internet, I have decided on this one to try and model, or something similar in concept. It has some very basic shapes that should
make it easier to model. I think this is a Russian stadium. Progress so far. I know I want to add some people and decide on some colors, and rest I'm not so sure about.

Draise · Post by **Draise** » 11 Feb 2018, 22:26

Beautiful start.

FHembree · Post by **FHembree** » 14 Feb 2018, 23:59

Made a little more progress. I have decided to add gridwork type frame to the dome area. I have added some people and added a couple of trees. Will duplicate the trees as needed to fill in the design.
I will also add some basic block shaped cars to the parking as needed. Then decided on some colors and maybe textures as appropriate.

FHembree · Post by **FHembree** » 16 Feb 2018, 04:41

Have added trees, cars, and people. Also added colors to make rendering look complete.
Added a few flags also. Now I will just study it and see if I can see think of anything else that might make it more complete.
All work was done in truespace workspace side. Trees, cars, and people were imported obj files from SketchUp.
Could have modeled cars in truespace, but faster and easier to just import find them from sketchUp.
Rendering was done with YafaRay

bitkar · Post by **bitkar** » 16 Feb 2018, 11:02

iam not sure about the proportions :) how many ppl can you fit in? isnt that too small? or the ppl to big? :) Looks like a stadium for few hundrets of ppl, usually its for tenths of thousands.

Steinie · Post by **Steinie** » 16 Feb 2018, 13:00

I certainly like your work BUT where is the ADA requirements

?

NO wheel chair ramp?
The parking lot is small so I picture this at a park with the top made of carbon fiber or plastic. There is not enough support at the base to hold the roof structure if the top is metal. Do you need the cables for support?
I also have visions of an Amiga 1000...
Great work as usual!

clintonman · Post by **clintonman** » 16 Feb 2018, 15:23

FHembree wrote: 16 Feb 2018, 04:41 ...
All work was done in truespace workspace side. Trees, cars, and people were imported obj files from SketchUp.
Could have modeled cars in truespace, but faster and easier to just import find them from sketchUp.
Rendering was done with YafaRay

Did you do the grid lattice work in trueSpace workspace? I have an unpublished technique for making lattices in workspace but it has a number of steps to make it happen.

FHembree · Post by **FHembree** » 17 Feb 2018, 06:31

Steinie wrote: 16 Feb 2018, 13:00 I certainly like your work BUT where is the ADA requirements ? NO wheel chair ramp?
The parking lot is small so I picture this at a park with the top made of carbon fiber or plastic. There is not enough support at the base to hold the roof structure if the top is metal. Do you need the cables for support?
I also have visions of an Amiga 1000...
Great work as usual!

I knew someone would comment about HC ramps. OK will add one somewhere on outside steps. Once inside there would be elevators.

FHembree · Post by **FHembree** » 17 Feb 2018, 06:35

clintonman wrote: 16 Feb 2018, 15:23
FHembree wrote: 16 Feb 2018, 04:41 ...
All work was done in truespace workspace side. Trees, cars, and people were imported obj files from SketchUp.
Could have modeled cars in truespace, but faster and easier to just import find them from sketchUp.
Rendering was done with YafaRay
Did you do the grid lattice work in trueSpace workspace? I have an unpublished technique for making lattices in workspace but it has a number of steps to make it happen.

Yes, in Truepace. Its simply the top portion of a sphere. I selected the faces and did a bevel, then deleted the interior faces and then extruded the remaining polygons. Very easy and straightforward.

FHembree · Post by **FHembree** » 17 Feb 2018, 06:43

bitkar wrote: 16 Feb 2018, 11:02 iam not sure about the proportions how many ppl can you fit in? isnt that too small? or the ppl to big? Looks like a stadium for few hundrets of ppl, usually its for tenths of thousands.

Yes, its a small stadium. Below is the image I used for inspiration.

Dragneye · Post by **Dragneye** » 17 Feb 2018, 20:45

Yeah FH, scale is off. Look at the containers at bottom of pic.
I think the culprit that fooled our eyes are the ramps. I think in reality they are Extra wide but compared to the whole stadium they look 'normal' wide.
Real cool work though.

bitkar · Post by **bitkar** » 18 Feb 2018, 18:01

i think in real its still bigger... like those cars and ppl were just too big. But good job anyway... its your project, just my opinion.

FHembree · Post by **FHembree** » 20 Feb 2018, 06:58

It was never meant to be a large stadium. Sized to be more a like a tennis arena or a swimming arena.

I have added HC ramps and clean up a few details.

Draise · Post by **Draise** » 20 Feb 2018, 16:08

Swimming, I'd go there to swim. Could also work for chess matches, League of Lengends, Dota, Table Tennis, Badminton, Gymnastics haha

The cooler sports.

FHembree · Post by **FHembree** » 21 Feb 2018, 06:02

I rescaled cars, people, and stair heights by 33 percent and rerendered, but I like the original size better.
Attached is the rescaled version. I think the people get lost when they are rescaled.

Draise · Post by **Draise** » 22 Feb 2018, 14:45

Yeah, I like the larger size, like a cozy hall. I think we have a winner here!

bitkar · Post by **bitkar** » 23 Feb 2018, 11:53

i like larger too :) sorry :))
The lower view looks good! nice modeling anyway :)

United3dArtists Archive

Sports Challenge WP

Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP

Re: Sports Challenge WP